Bernini BE24
BE24
The BE24 is suitable for the control and monitoring of all engines and GenSets.
The BE24 Monitors:
- Low Fuel
- Low Oil
- High Temperature
- High/Low Battery Voltage
- Charge Failure
- Fail to Start
- Alternator Failure
- Over/Under Frequency
- Over/Under Voltage
- Over/Under Speed
- Overload
Specification:
| Supply Voltage | 7Vdc to 33Vdc |
|---|
| Reverse Polarity | Permitted for unlimited time |
|---|
| Supply Ripple | 15% up to 65Hz |
|---|
| Protection | internal 300mA /60V thermal fuse on the power line |
|---|
| Over voltage | 50V (60 seconds) at 40 degrees C |
|---|
| V Battery Display Error | 3% |
|---|
| Weight | 450 g |
|---|
|
Bernini BE22
BE22
The BE22 is suitable for the control and monitoring of 12V and 24V battery systems.
The BE22 Monitors:
- Low Fuel
- Low Oil
- High Temperature
- High/Low Battery Voltage
- Charge Failure
- Fail to Start
- Alternator Failure
- Over/Under Frequency
- Over/Under Voltage
- Over/Under Speed
- Overload
Specification:
| Supply Voltage | 7Vdc to 33Vdc |
|---|
| Reverse Polarity | Permitted for unlimited time |
|---|
| Supply Ripple | 15% up to 65Hz |
|---|
| Protection | internal 300mA /60V thermal fuse on the power line |
|---|
| Over voltage | 50V (60 seconds) at 40 degrees C |
|---|
| V Battery Display Error | 3% |
|---|
| Weight | 1500 g |
|---|
|
